MikroTik Certified Routing Engineer is an advanced certification that covers different aspects of routing, relevant to larger networks and ISPs, with focus on OSPF with single and multiple areas, Policy Routing, and advance use of static routing. It also covers the configuration of multi-homed devices, for Load Balancing and Failover. MTCRE is a requirement for the third level certification – MTCINE
The course includes 1 days of hands-on training and intense lab workshops. Those students who take the course and pass the examination at the end of the course will receive full certification from MikroTik.
506-A1, 6th floor, Jeff Heights Gulburg iii Lahore
Valid MTCNA Certificate Number.
What is the target audience?
- This course is intended for anyone interested in learning MikroTik routing.
- ISP Owner / Network Engineer
- Network Consultant
- Anyone who want to build the carrier in networking
By the end of this training session, the student will be familiar with routing . He will also be able to configure link redundancy (load balancing, failover), policy routing, vlan and tunneling.
- The duration of the training is 1 days
- The timings would be from 09:00 to 17:00 hours.
- The passing grade is 60%, if you pass the exam your certificate will be immediately available in your MikroTik account (PDF format)
- For those who score between 50-59%, will get a second chance. (Free of cost and the same day).
- We will send you the invitations to your email addresses once you confirm the payments. (make an account at mikrotik.com to enroll yourself for the training)
- Your names and particulars should be as on your previous certificates, be very careful about the capital letters (for example if you type your name as … azfar hameed khan… it will be printed on your certificate in the same way. So we suggest you type in subjective case or in capital letters)
- Please try the example test in your mikrotik.com account to get a better picture about the online exam.
- we are not responsible for accommodation and traveling.
- Every candidate must bring their own Router with at least 1 Wlan Interface, I suggest hap-Lites.
- Every candidate must bring their own several short UTP RJ45 cables and power extension cables.
- Every candidate must bring their own Laptop and mouse, Laptops must be Virus Free and fast enough to help you for faster browsing. (This is a very important, in previous trainings it happened a lot when the candidates couldn’t continue their exams, just because their laptops got stuck)
- On the last day of the training there will be an online exam of 60 minutes. (25 questions each.)
Section 1: Routing Overview
- What is router and routing
- When we use routing?
- Routing Information Base (RIB)
- Forwarding Information Base (FIB)
- Routing decision
- The different between static route and dynamic route
- The different between Interior and Exterior Gateway Protocol
Section 2: Static Routing
- gateway and check gateway
- scope and target scope
- Creating routes
- Setting default route
- Implementing static routing on simple network
- Types of load balancing in MikroTik
- Load balancing Equal Cost Multiple Path (ECMP)
- Administrative Distance
- Check Gateway implementation
- Mangle routing mark
- Push specific traffic through one specific gateway
- Scope and target scope
- Recursive nexthope lookup
Section 3: OSPF
- What is OSPF
- How OSPF protocol works
- OSPF Area (backbone, NSSA, Stub)
- DR, BDR
- IR, ABR, ASBR
- OSPF LSA
- AS Type-1
- AS Type-2
- Point to Point
- Point to Multi Point
- Passive Interface
- OSPF authentication methods
- OSPF Virtual Link
- Extended backbone area
- Dijkstra Algorithm
- OSPF load balancing
- OSPF fail over
- Filtering Prefix
- Change route parameters